Deck
S2 Topper
Counter sunk mounting bolt
Round head mounting bolt
S2 height adjust screw
Mounting nut
S2 base
Caster
5 Truck
*Be careful, the grip is pretty strong until it completely gives way. Make sure your hand is not behind the hole when your doing your poking.
*Don’t be the noob that misses the slot in the bottom of the topper. Attaching the topper to the side of the base will result in the screws immediately bending.
*If you are worried about the direction of the graphic take note of which side you install the binding toppers on as there is a toe and heal side of the toppers.
Make sure your caster wheel is tightened, the bracket feels strong, and that the caster spins all the way around.
Check your edge wheel nuts for proper tightness.
Check to see if your kingpin nut is properly tightened
Insure your bindings are properly assembled and have the height adjust screws installed.
Pull the hanger arm away from the deck to make sure your easy blocks are installed and the springs are properly secure.
Check out other explain pages.
Stay connected to the Sport & Community. Don’t miss any deals or product releases. Sign up now and get the Freebord Success Rules for free!
